Cookie Img
call-us
Home » Products » Thermodynamics Lab Equipments » Centrifugal Blower Test Rig

Centrifugal Blower Test Rig

Centrifugal Blower Test Rig
Centrifugal Blower Test Rig
Send Inquiry
Product Code : 02
Product Description

The blowers are used to supply the air mainly in furnaces for burning the fuel. The blowers depending upon their impellers are of following types:

  • Radial Curved Vanes
  • Forward Curved Vanes
  • Backward Curved Vanes

Specifications :

The unit consists of:

  • AC motor of 1 HP at 1400 RPM is coupled to the impeller.
  • Arrangement is provided to change the impeller to perform the experiment with all the three impellers i.e radial, forward and backward.
  • RPM Contact type Tachometer is provided on the control panel to measure the RPM.
  • Voltmeter and Ammeter are provided on control panel.
  • Outlet pipe of 50mm dia with 2 meter length is fitted. A butterfly valve is used to control the discharge.
  • Pitot tube is used to measure the outlet velocity of air. A U tube manometer is fitted across the limbs of Pitot tube. Another pitot tube used to measure the inlet velocity of air.

Experimental capabilities :

  • This test rig is used to
  • Efficiency of blower at different outlets.
  • Efficiency of blower with different impellers i.e. radial impeller Backward curved impeller and forward curved impeller.

ROORKEE EQUIPMENT & MODELS PVT. LTD.
X


ROORKEE EQUIPMENT & MODELS PVT. LTD. All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.